Titanium flanges are mainly used in aerospace, shipbuilding, nuclear energy, chemical industry, military industry and other industries. They are used to manufacture battery check valves, exhaust valves, analyzers, gas flow regulating valves, pressure gauges, etc., and can also be used in hydraulic systems. Pipeline connections, structural component connections, etc.

A method by which a titanium workpiece is made atomically bound by heating or pressurizing, or a combination of both, with or without a filler material.Titanium and titanium alloys commonly used welding methods are: melt welding, brazing, solid bonding, mechanical bonding, bonding, etc. Among them, melt welding is the most widely used, can be divided into: arc welding, electron beam welding, resis...

Die forging processes can be classified according to the following principles:According to the flow conditions of metal deformation, it can be divided into open die forging and closed die forging;According to the temperature of the blank during die forging, it can be divided into hot forging, warm forging and cold forging.According to the combination form of die forging process, it can be divided ...

Titanium has a tendency to fill grinding wheel, so it is difficult to wear titanium belt. Before grinding, the higher temperature rise on the interface between metal and grinding wheel makes the grinding surface produce higher residual stress, and the surface finish is not ideal.These difficulties can be largely resolved by:(1) Choose the right grinding wheel, such as silicon carbide grinding whee...

Metal communities are highly reductive at high temperatures, combining with oxygen, carbon, gas, and many other elements, and capturing oxygen from some metal vaporizers (such as alumina). At room temperature, the needle combines with oxygen to generate a layer of very thin and dense oxide film. This layer of oxygen film does not react with most of the strong acid and alkali at room temperature, i...

Rolling is by virtue of the friction of the upper and lower rotating rolls, the metal material is dragged between the rolls, and at the same time rely on the roll to exert pressure for continuous compression deformation, get the required shape of the processing method. In other words, it makes use of the friction between the rolled piece and the roll to attract the rolled piece to the roll for con...

Titanium surface treatment technology is mainly to improve the surface function of titanium, in order to meet the special requirements of the material, the main categories are:Surface purification, namely to improve the surface cleanliness of titanium and titanium alloy.Corrosion resistance surface treatment, namely to improve the corrosion resistance of titanium alloy surface.Wear resistance surf...

A method of atomically bonding a titanium workpiece by heating or pressurizing it, or a combination of both, with or without filler material.Titanium and titanium alloy commonly used welding methods are: melt welding, brazing, solid bonding, mechanical bonding, bonding and so on. Among them, melt welding is the most widely used, which can be divided into arc welding, electron beam welding, resista...

Titanium itself is not magnetic, and titanium alloys without iron are not magnetic either, so it can effectively avoid magnetic interference. Used for submarine housing, does not cause mine explosion. Besides used in national defense, air force, home to weapons manufacture, are widely used in railway engineering, communications, aerospace, aviation, high-tech laboratories, hospitals, scanning, X-r...

Rolling is a processing method that uses the friction force of the upper and lower rotating rollers to drag the metal material into the rolling room, and at the same time relies on the roller to exert continuous compression deformation to obtain the desired shape. In other words, it makes use of the friction between the rolled piece and the roll to induce the rolling piece to be rolled continuousl...

iron industry• About 85% to 90% of the world's niobium is used in steel production in the form of ferroniobium. Only adding 0.03% to 0.05% of niobium to the steel can increase the yield strength of the steel by more than 30%. Niobium can also achieve the dispersion and distribution of precipitates by inducing precipitation and controlling the cooling rate, and adjust the toughness level of steel i...

Tantalum has a series of excellent properties such as high melting point, low vapor pressure, good cold working performance, high chemical stability, strong resistance to liquid metal corrosion, and large surface oxide film dielectric constant. Therefore, tantalum has important applications in high-tech fields such as electronics, metallurgy, steel, chemical, cemented carbide, atomic energy, super...

Titanium and titanium alloys still maintain certain mechanical properties at low and ultra-low temperatures. As the temperature decreases, the strength of titanium and titanium alloys increases, while the ductility gradually decreases. Many annealed titanium alloys have sufficient ductility and fracture toughness at a temperature of 195.5℃. Ti-5al-2.5sn with extremely low interstitial elements can...

Titanium pipes are prone to surface defects, especially internal surface cracks and folds, during the cold rolling process. The mechanical properties of pure titanium largely depend on the content of interstitial elements, especially the oxygen content. The reduced oxygen content material has good plasticity and good processing performance, but this method alone does not eliminate defects such as ...

(1) Due to the small elastic modulus of titanium alloy, the workpiece in the process of clamping deformation and stress deformation, will reduce the machining accuracy of the workpiece; Workpiece installation clamping force should not be too large, if necessary, can increase the auxiliary support.(2) If the gas containing cutting fluid is used, the cutting process will decompose and release hydrog...

The general principle of titanium cutting is: low cutting speed, large feed, lubrication,Cooling.(1) the lower cutting speed should be used, generally speaking, should be 50% lower than the cutting speed of steel parts with the same hardness.(2) the use of large feed, in the cutting process do not stop the tool, when the tool to go back through the workpiece should be the first back tool.(3) The c...

A non-ferrous metal matrix is formed by adding another or several metallic or non-metallic components to form a substance with both the similarity of matrix metal and certain properties, which is called non-ferrous metal alloys. Non-ferrous alloy can be divided into aluminum alloy, copper alloy, magnesium alloy and titanium alloy according to the matrix metal; According to its production method, i...

Titanium has low density, high melting point, poor thermal conductivity and electrical conductivity, similar to or slightly lower than stainless steel, titanium has superconductivity, the critical temperature of superconductivity of pure titanium is 0.38~0.4K. Titanium is a nonmagnetic substance.Titanium has plasticity, high purity titanium elongation can reach 50%~60%, area shrinkage can reach 70...

Tantalum has a series of excellent properties such as high melting point, low vapor pressure, good cold working performance, high chemical stability, strong resistance to liquid metal corrosion, and large dielectric constant of surface oxide film.We do tantalum refining process fro many years. we can produce tantalum sheet, foil,tantalum bar,tantalum wire, tantalum pipe ,and aslo pipe fitting mate...

Tungsten copper alloy is an alloy composed of tungsten and copper. Commonly used alloys contain 10% to 50% copper. The alloy is prepared by powder metallurgy, which has good electrical and thermal conductivity, good high-temperature strength and certain plasticity. At very high temperatures, such as above 3000°C, the copper in the alloy is liquefied and evaporated, absorbing a large amount of heat...

Shape memory alloy is an alloy that can automatically restore its plastic deformation to its original shape at a certain temperature.In addition to the unique shape memory function, the memory alloy also has excellent characteristics such as wear resistance, corrosion resistance, high damping and super elasticity.Nitinol alloy composition amolst incluing nickel and titanium.The expansion rate is a...

First of all, you can contact us by email ,phone,whatsapp.then you can send me your detials inquiry and we can quota your price. Secondly, you need to send confirmed order to us,we will do Proforma invoice. After receiving your advance payment, we will proceed to production. After the goods completed, we will conduct inspections and deliver the goods after the inspections are qualified.Finally, pa...

When the product is completed, we can provide a test report of the material, and you can also perform the test after you receive the product. If there is any problem, we will re-deliver it.For delivery time ,it depends on the inventory availability.If the materials you need are in stock, the delivery time would be within 7 work days, but if not the delivery time would be around 30 work days.We wi...

Yes, we provide samples for testing under the condition of freight paid by customer.and we are willing to produce 1kg&1pc as we can. . we aslo accept manufacture customization productsroduce according to customer drawing or detials infomarions.

Our company can provide titanium, tantalum, niobium, zirconium, titanium-clad copper, nickel-titanium alloy, copper-nickel alloy, tungsten copper alloy and other metal materials. like: sheet-plate,bar-rod,pipe-tube,wire,forging,fasteners.We aslo produce processing machined parts related to these materials.

We can supply titanium rod grade such as :Gr1, Gr2, Gr4,Gr5 ,Gr7, Gr9, Gr12 ,Gr23. We can also accept custom-made grades, but the quantity is required.We often supply ASTM B348 industry titanium bar , AMS 4928 aerospace titanium bar , ASTM F67, ASTM F136 medical titanium bar standard ,they are widely used in aircraft engines and parts, chemical equipment parts (reactors, pipes, heat exchangers and...

Titanium and titanium alloy melting point is high, chemical properties are active, easy to interact with air and refractory materials in the melting state, usually with water-cooled copper crucible vacuum consumable electric arc furnace smelting, can also be used for plasma furnace smelting, in recent years also developed cold bed furnace smelting, cast into flat ingot. The following mainly introd...