What is a titanium alloy? Titanium alloy is a variety of alloy metals made of titanium and other metals. It has the advantages of high strength, good corrosion resistance and high heat resistance. It is commonly used in aero engines and is a new important structure in the aerospace industry material.

Commercial pure Titanium is a dense metal titanium with at least 99% titanium content and a small amount of impurities such as iron, carbon, oxygen, hydrogen and hydrogen.

The dullness of titanium depends on the presence of oxide film, and its corrosion resistance is much better in oxidizing soulution than in reducing solution, where rapid corrosion can occur. Titanium in some corrosive solution corrosion performance is superior, such as seawater, wet chlorine, chlorite and secondary atmosphere acid solution, nitric acid, acid, metal chloride, sulfide and organic acids.

To manufacture 1 ton of titanium sponge, about 1.5 tons of magnesium ingots are needed, and there is a great demand for magnesium. The surge in magnesium prices this round will greatly increase the manufacturing cost of titanium sponge. It is reported that titanium sponge manufacturers have suspended external quotations on the 22nd, and contracts that have not yet been signed have also been suspended. All this indicates that the price of sponge titanium will be very likely.

Titanium is a very corrosion-resistant metal. However, the thermodynamic data of titanium metal materials show that titanium is a thermodynamically unstable metal. If iron can dissolve to Ti2+, the standard electrode has a negative potential (-1,63V) and is always covered with a dull titanium oxide film.In this way, the stable potential of iron is stably positive. For example, the stable potential of titanium in seawater at 25℃ is about +0.09V.

We finished Gr5 DIN7985 M3 5000pcs titanium bolts for sale this month

The main methods used in titanium alloy forging are: free forging, open die forging (with burrs, die forging), closed die forging (without burrs), extrusion die forging, multi-direction die forging, partial die forging, isothermal die forging,

2021 (2nd) Titanium Industry Information Titanium Smelting, Forging and Rod Wire Powder Advanced Structural Materials Forum The third generation of green kitchen appliances seminar was held in Baoji City, Shaanxi Province.

Affected by the price increase of upstream raw materials, the prices of titanium rods, titanium wires and other products have risen

Titanium anode have iridium oxide coated titanium anodes,mixed metal oxide coated titanium anodes,platinised titanium anodes,titanium anode mesh and titanium anode plate.See below for the performance of titanium anodes.

Nowadays,titanium wire frame glasses are becoming more and more popular and have become a fashion, especially for mid-to-high-end business elites, and pure titanium frames are even more respected.

Analysis of the application of titanium bicycle tube sets in bicycles.Most of the parts are machined with titaniun bike bars. and titanium flat bar road bike.

What is the difference between tungsten copper alloy and molybdenum copper alloy?Also as alloy materials, tungsten-copper alloys and molybdenum-copper alloys are used in a wide range of applications, such as aerospace, aviation, navigation, military, defense, electronics, electric power, metallurgy, machinery, sports equipment and other industries.

Which is better, titanium alloy or stainless steel?（ how to weld titanium exhaust pipe？）The difference between titanium and titanium alloy and stainless steel.

Classification of titanium and top ten performance( 0.5 mm titanium sheet),Classification of titanium and top ten performance.

Titanium: an indispensable material for weapons. (Titanium products mentioned in the article:titanium tube plugs, 6 4 sheet.)

Ti-Ni alloy is a stoichiometric compound of Ti and Ni,nitinol smart alloy is nitinol a shape memory alloy.The equiatomic intermetallic compound TiNi exhibits the shape memory phenomenon that allows for the spontaneous recovery of shape after being subjected to macroscopic deformation higher than its elastic limit.

GR5 titanium alloy material parameters,such as grade 5 titanium plate, grade 5 titanium round bar,g23 titanium belly ring,grade 5 titanium bolts.

TC11(Ti-6.5Al-3.5Mo-1.5Zr-0.3Si) titanium alloy parameters（titanium sheet ams 4911).TC11 titanium alloy is a high-temperature titanium alloy widely used in China's aviation industry.

Titanium anode(anodized titanium sheet and anodized titanium ring).Titanium anode introduction,advantages and classification.

Why are bicycle parts made of titanium alloy so expensive?For example:.titanium mountain bike bolts,titanium cycling bolts,mountain bike titanium bolt kits,dirt bike titanium bolt kit,titanium bolts for road bikes,titanium bolt kit road bike.

The titanium ingot melting and casting process is generally divided into three stages, one is the batching, the second is the binding of the electrode, and the third is the melting and casting.

For outdoor enthusiasts, all metal products should be replaced with titanium.grade 2 titanium tube.

Application and status quo of lightweight automotive titanium alloy materials.titanium engine bolts.

What are the forging methods of titanium forgings? What are the characteristics of each?For example:forge titanium ring.

Titanium alloy materials and welding specifications.For example:how to weld titanium pipe?

Application of titanium and titanium alloys in cardiovascular restoration materials.Such as nitinol memory alloy.

Problems and Measures in Mechanical Processing of Titanium Alloy Fasteners

Management of materials and environment before welding titanium composite plate tanks

Military upstream analysis titanium alloy companies have higher performance growth.

New era kitchen needs​-titanium milk pan.

Tantalum (metal element).We are tantalum target supplier.

What are the advantages and scope of application of titanium heat exchangers?We are titanium tube heat exchanger,titanium tube sheet,titanium pipe fittings suppliers about 9 years.

Titanium fittings solve the problem of pipeline corrosion in industrial applications.

What are the main factors affecting the service life of titanium anodes?

Niobium.Superconducting applications and Medical application.

Analysis of Sponge Titanium Production in November 2021

Six Defects Easily Appeared in Titanium Alloy Forgings.

Development and application market of low-alloy titanium coils.

Advantages and applications of various titanium anode plates.